Concept and Objectives:

Aeronautics is a key asset for the future of Europe, but nowadays the industry has to face the challenge of “More Affordable, Safer, Cleaner and Quieter” while at the same time accounting for a demand that will triple over the next 20 years. WASIS project aims to rise to this challenge with the development of a composite fuselage structure based on the lattice stiffening concept, optimizing geometrical and mass properties of transition zones of fuselage structural joints. Project overall concept is focused on simultaneous meeting environmental demands and rising safety coupled with design and manufacturing cost-efficiency improvement.

The lattice approach allows composites to obtain more efficient mechanical behaviour, reducing weight and optimizing structure performance, which will be proved by comparative simulations against other approaches. This will be combined with specially designed semi-loop and micro-pin joining elements to provide the ability of innovative non-regular lattice structure manufacturing, save aircraft weight, avoid fuselage section weakening due to cutting reinforcement fibres.

Furthermore, the structure will also be developed to better withstand worst situation loadings, assessing safety through the large adoption of simulation and virtual testing from the very first design stages to analyze explosions and material damping. Developed innovative fuselage section design will be merged with high-productive filament winding technology to reduce manufacturing costs and time, and samples will be manufactured in order to prove how the different concepts fit together. Complete testing of the samples will be applied to prove the wafer approach. As a result of this project integrated approach – sufficient fuselage weight savings, manufacturing cost/time efficiency and safety increasing are to be achieved.

WASIS Results in brief:

Stiffer fuselages, lighter planes

A new design for stiffening aircraft bodies will make them lighter and consequently, more fuel efficient. The European concept depends on a composite lattice design.

Fuel prices have greatly affected airline profitability and there is an urgent need for future aircraft to be cheaper and more fuel efficient. New designs will incorporate many cost-saving features, one of which will be aircraft-body (fuselage) stiffening.

This is the goal of the WASIS project, a partnership among 11 European organisations from 10 countries. Their broad goal is to develop a stiffer fuselage based on an all-composite lattice design. The project focuses on making medium-sized aircraft greener, safer and more efficient.

Specifically, WASIS will focus on reducing fuselage weight via several means. These include optimising shape and weight properties of the transition zone of fuselage joints, and replacing the joints with innovative micro-fasteners. The stiffer fuselage will be safer compared to conventional designs. The WASIS innovations will also reduce construction costs through automated manufacturing of wafer structures.

The project’s first year saw the beginning of fuselage design that included all joints and openings so that manufacture would require fewer cuts. A wafer structure was designed using operational load scenarios, and then tested against conventional structures. All designs were simulated and refined during the project’s second year.

Other work focused on the selection of materials suitable for the lattice design, from a list of candidates already used in aerospace. Chosen materials were tested during the second year.

Feasibility was assessed by manufacturing scaled demonstrators using different materials and techniques. These helped establish the feasibility of filament winding and tape placement as viable processes for the lattice structure. Other tests of manufacturing techniques are underway, including options for automation, combined with stress-testing of the resulting materials. Future work will merge fuselage design with filament-winding technology to reduce manufacturing costs.

WASIS offers a unique opportunity to combine modern composite materials with automated manufacturing, together leading to stronger and lighter aircraft frames. This will reduce fuel consumption and manufacturing wastage. Meanwhile, new designs will make repairs easier. These innovations will foster European industry.

Public Documents

Periodic Report Summary
Periodic Report Summary 2
Periodic Report